|
|
|
|
|
|
BRACKET SHELF UTLTY 8X10 BLK
|
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak.
|
|
|
|
|
|
|
|
|
|
SuperSlide 948 Pre-Loaded Wall Bracket, 4-1/8 in L x 1-3/4 in W x 2 in D, Resin, White
|
|
|
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
|
|
|
|
|
|
|
|
|
|
SuperSlide 5629 Closet Rod Support, 5-3/4 in L x 0.87 in W x 3.87 in D, Resin, White
|
|
|
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin
|
|
|
|
|
|
|
|
|
|
Closetmaid 71016 Shelf Organizer End Cap, 1/4 in L x 0.4 in W x 0.4 in D, Plastic
|
|
|
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
|
|
|
|
|
|
|
|
|
|
Knape & Vogt 255 Adjustable Heavy Duty Shelf Standard, 36 in L X 5/8 in W X 3/16 in D
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
|
|
|
|
|
|
|
|
|
|
Prime Line N 6568 Universal Pole Socket, 1-3/8 in ID X 2-3/16 in OD X 3/4 in W, White
|
|
|
Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws.
|
|
|
|
|
|
|
|
|
|
KNAPE & VOGT 180 BR 8 Regular Duty Shelf Bracket, 8 in L, 16 ga Cold Rolled Steel, Brass
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket, 8 in L, Anochrome
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
Knape & Vogt BK-0101 Heavy Duty Shelf Bracket, 10 in L, Steel
|
|
|
Designed to fit into the fast mount standards, load tested to 100 lbs.
|
|
|
|
|
|
|
|
|
|
Knape & Vogt CD-0019 Closet Pole End Cap, For Use with 1-1/4 in Closet Pole, Plastic, White
|
|
|
Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
|
|
|
|
