|
|
|
|
|
|
General Tools 843/1 Pencil Compass/Scriber, 8 in Diameter, Steel, Brass Plated
|
|
|
Made from brass-plated steel with a hardened-steel pin. The Compass has a jaw capacity of 8" in diameter and a full-length, hardened steel pin for scribing and stability. Wing nut adjustment up to 8". Used for marking contours and circles. Pencil not included.
|
|
|
|
|
|
|
|
|
|
General Tools 842 Pencil Compass/Scriber, 9 in Diameter, Die-Cast Metal
|
|
|
Robust scribing and marking tool with a jaw capacity of up to 9". The fulcrum spring handle makes this tool great for making contours, circles and edge marks. Made from durable die cast metal with scribe guide for edge marking. For use with pencil (included) or slim ball-point pen.
|
|
|
|
|
|
|
|
|
|
General Tools 29 Angle Protractor With Brass Locknut, 0 - 165 deg, Plastic
|
|
|
A practical tool for measuring and duplicating difficult angles where a standard protractor or t-bevel cannot fit. The Protractor works on outside, inside and sloped angles from 0 to 165 degrees. The four-piece design adds additional versatility for measuring particularly difficult angles. Fine black graduations from 0 degree to 80 degrees in opposite directions. Brass lock nut.
|
|
|
|
|
|
|
|
|
|
Empire 36 Magnetic Protractor, 0 - 360 deg, Polycast
|
|
|
Magnetic base and back. Easy reading dial with adjustable angle pointer. Built-in angle pitch calculator on back.
|
|
|
|
|
|
|
|
|
|
General Tools 230 Economy Feeler Gauge, 26 Leaf
|
|
|
Used for adjusting and gauging spark plugs, distributor points and valve clearances, or any other instance of measuring the space between two parts. This 26 leaf gage features straight leaves etched with both Metric and English units, ranging from .0015" to .025" and .037mm to .635mm. Leaves are 3" long and 1/2" wide. The set is housed in a protective holder to preserve the trueness of the leaf edges.
|
|
|
|
|
|
|
|
|
|
General Tools 132ME Nib Pocket Caliper, 0 - 3 in, 32nd, Stainless Steel
|
|
|
Delivers accurate measurements up to 1/32". The stainless steel body delivers both Metric and English readings of inside and outside measurements. There is also a decimal equivalents chart printed on the back side for help with calculations. Etched and filled black graduations.
|
|
|
|
|
|
|
|
|
|
General Tools 17 Square Head Protractor, 0 - 180 deg, Stainless Steel, Silver
|
|
|
Made of ground stainless steel for optimum accuracy. Permanently etched graduations from 0 degree to 180 degrees in opposite directions. Adjustable 6" protractor arm locks into desired position with knurled thumb nut with 3-3/8" x 2" head.
|
|
|
|
|
|
|
|
|
|
General Tools 729 Nib Pocket Caliper, 0 - 4 in, 16th, 32nd, Stainless Steel
|
|
|
Delivers the same accuracy and precision as some larger models. Compact, stainless steel construction these Slide Calipers provide inside and outside readings in both 1/16" and 1mm graduations. In addition, there is a decimal equivalents chart on the caliper?s back side for help in making measurement calculations. Etched and filled black graduations.
|
|
|
|
|
|
|
|
|
|
General Tools 450-6 Flag Leg Divider, 0 - 6 in, 0.001 in, 6-1/4 in, Forged Steel
|
|
|
Hardened and tempered bow springs assure uniform tension without side play. Adjusting screw has self-seating washer and nut for quick adjustments. Legs made from special caliper steel with hardened points. Used in marking circles, tracing contours and transferring measurements. Conforms to government specifications GGG-C-95.
|
|
|
|
|
|
|
|
|
|
General Tools 452-6 Flag Leg, Spring Outside Caliper, 0 - 6 in, 1/8 in, 1/16 in, 1/32 in, 1/64 in
|
|
|
Useful measurement transfer tool when working with round stock or oddly shaped materials. Hardened and tempered bow springs assure uniform tension without side play. Adjusting screw has self-seating washer and nut for quick adjustments. Legs made from special caliper steel with hardened measurement points. Conforms to government specifications GGG-C-95.
|
|
|
|
