|
|
|
|
|
|
3M 49554 Stak-It Cable Stackers
|
|
|
Designed to meet the spacing requirements of the 1990 National Electrical Code, article 300-4-(d). Allows installation of multiple NM cables on one side of a 2x4. Accepts a wide range of flat NM cables, from 1 number 14-2 AWG to 1 number 10-2 AWG. Also accepts round cables up to .30" diameter. Spaces cables to center of standard 2x4. Reduce potential heating that could occur if cables are stacked under a single fastening device. Dresses wires for professional look in exposed areas, such as panel boxes. Easy installation - cables snap in for positive lock. Simplifies cable identification. Made from reclaimed plastic.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GSE-15310 Service Entrance Staple, 13/16 in Crown, 1-3/8 in L, Metal
|
|
|
Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MS-1550T Cable Staple, 1/2 in Crown, 1-1/8 in L, Metal
|
|
|
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MS Cable Staple, 1/2 in Crown, 1 in L, Metal
|
|
|
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PSG-15 Low Voltage Cable Staples, 7/16 in Crown, 1-1/4 in L, Polyethylene, Gray
|
|
|
For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MSI-50B Insulated Cable Staple, 1/2 in Crown, Metal
|
|
|
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MSI-1525T Insulated Cable Staple, 1/2 in Crown, Metal
|
|
|
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MS-1575T Cable Staple, 9/16 in Crown, 1-1/4 in L, Metal
|
|
|
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PWS Low Voltage Kwik Mount Cable Staple, 3/16 in Crown, 7/8 in L
|
|
|
Quick fastening and guiding of wires. Wires easily snap in or out of two usable sides. Use to secure Christmas light sets, sound system wires, etc. Holds category 5 cable for datacom.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PSB Cable Staple, 3/16 in Crown, 7/8 in L, Plastic, Black
|
|
|
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
|
|
|
|
