|
|
|
|
|
|
Oatey 43561 Snap-In Floor Drain, 2 in, Solvent Weld, PVC
|
|
|
Designed for drainage in areas where waterproofing membrane is not required. Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe. One piece design does not allow for removal of the cover.
|
|
|
|
|
|
|
|
|
|
Oatey 151 Square Tile Ring, For Use With 151 Series Cast Iron Shower Drains, 4-1/4 X 4-1/4 in, Stainless Steel
|
|
|
4-1/4" x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains.
|
|
|
|
|
|
|
|
|
|
Oatey 43569 Snap-In Floor Drain, 4 in, Solvent Weld, PVC
|
|
|
Designed for drainage in areas where waterproofing membrane is not required. Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe. One piece design does not allow for removal of the cover.
|
|
|
|
|
|
|
|
|
|
Oatey 43565 Snap-In Floor Drain, 3 in, Solvent Weld, PVC
|
|
|
Designed for drainage in areas where waterproofing membrane is not required. Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe. One piece design does not allow for removal of the cover.
|
|
|
|
|
|
|
|
|
|
Screw-Tite 42358 Replacement Strainer, 4 in Diameter, Stainless Steel
|
|
|
For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged.
|
|
|
|
|
|
|
|
|
|
Danco 80001 Tub Spout Ring, 3-5/8 in OD 2-1/4 in ID, 7/16 in Thick, Chrome Plated
|
|
|
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
|
|
|
|
|
|
|
|
|
|
Danco 80002 Tub Spout Ring, 3-5/8 in OD 2-1/4 in ID, Brushed Nickel
|
|
|
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
|
|
|
|
|
|
|
|
|
|
Plumb Pak PP826-64 Strainer Dome Cover With Screw, 3 in Dia, 1-1/2 in Screw Length, Chrome
|
|
|
Strainer dome cover with screw.
|
|
|
|
|
|
|
|
|
|
Plumb Pak PP826-4 Flat Tub Overflow Washer, Sponge
|
|
|
Plumb Pak Tub Overflow Washer, Flat, Sponge
|
|
|
|
|
|
|
|
|
|
Plumb Pak Water Saver Economy Showerhead, 1/2 in, Plastic
|
|
|
Installs to standard 1/2" shower arms. 2.0 gpm flow rate.
|
|
|
|
