|
|
|
|
|
|
Anderson 756116-02 Street Pipe Elbow, 90 deg, 1/8 in, FIP X MIP, 1000 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 756116-04 Street Pipe Elbow, 90 deg, 1/4 in, FIP X MIP, 1000 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 738116-04 Street Pipe Elbow, 90 deg, 1/4 in, FIP X MIP, 200 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 738116-02 Street Pipe Elbow, 90 deg, 1/8 in, FIP X MIP, 200 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 738116-06 Street Pipe Elbow, 90 deg, 3/8 in, FIP X MIP, 200 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 756116-06 Street Pipe Elbow, 90 deg, 3/8 in, FIP X MIP, 1000 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 738116-08 Street Pipe Elbow, 90 deg, 1/2 in, FIP X MIP, 200 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 738116-12 Street Pipe Elbow, 90 deg, 3/4 in, FIP X MIP, 200 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
|
|
|
|
|
|
Anderson 738116-16 Street Pipe Elbow, 90 deg, 1 in, FIP X MIP, 200 psi, Brass
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
|
|
|
