|
|
|
|
|
|
Dremel 402 Mandrel, For Use with Cutting Wheels, Sanding Discs and Polishing Wheel, 1/8 in Dia
|
|
|
To be used with all cutting wheels, sanding discs and polishing wheels.
|
|
|
|
|
|
|
|
|
|
Dremel 429 Felt Polishing Wheel, 1 in
|
|
|
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 422 Felt Polishing Tip, 3/8 in Dia
|
|
|
Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 560 Cutting Bit, 1/8 in Dia, 1/8 in Shank, 30000 rpm, High Speed Steel
|
|
|
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 432 Drum Sander Band, 1/2 in Dia, 1/8 in Shank
|
|
|
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 408 Drum Sander Band, 1/2 in Dia, 1/8 in Shank
|
|
|
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 430 Drum Sander Band, 1/4 in Dia, 1/8 in Shank
|
|
|
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 8193 Grinding Stone, 5/8 X 3/8 in Dia, 1/8 in Shank, Cylinder
|
|
|
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Bosch Accessories 113 Engraving Cutters, Rotary Tool, 1/16 Inch
|
|
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM.
|
|
|
|
|
|
|
|
|
|
Dremel 932 Grinding Stone, 3/8 X 1/8 in Dia, 1/8 in Shank, Cylinder
|
|
|
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM.
|
|
|
|
