|
|
|
|
|
|
COLD SHUTS 3/16IN ZN PLT
|
|
|
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
|
|
|
|
|
|
|
|
|
|
Campbell T4900424 Cold Shut, 1/4 in
|
|
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
Campbell T4900324 Cold Shut, 3/16 in
|
|
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
COLD SHUTS 1/4IN ZN PLT
|
|
|
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments
|
|
|
|
|
|
|
|
|
|
COLD SHUTS 5/16IN ZN PLT
|
|
|
National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments
|
|
|
|
|
|
|
|
|
|
Campbell T4900524 Cold Shut, 5/16 in
|
|
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
Campbell T4900624 Cold Shut, 3/8 in
|
|
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
COLD SHUTS 3/8IN ZN PLT
|
|
|
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
|
|
|
|
|
|
|
|
|
|
COLD SHUTS 7/16IN ZN PLT
|
|
|
National Hardware Cold Shut, Series: 3153BC, 7/16 in, 0.42 in Rod Diameter, 0.43 in Diameter, Steel, Zinc Plated, 3500 lb Load Capacity, 2.54 in Width, For Use to Couple Chain Attachments
|
|
|
|
|
|
|
|
|
|
Campbell T4900824 Cold Shut, 1/2 in
|
|
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
|
|
|
